How to Make Quick and Easy Remedial Repairs Around the Home
Things will inevitably go wrong around the house from time to time. Whether it’s a plumbing issue, a hole in the wall, or a broken window, it’s important to know how to make quick and easy remedial repairs.
Failing to do so can result in further damage, and in some cases, it can even be dangerous. That’s why we’ve put together this list of 5 ways to make quick and easy remedial repairs around the home. So, next time something goes wrong, you’ll know exactly what to do!
Repairing a leaky faucet:
If you have a leaky faucet or tap, it can be an expensive problem to fix. But if you’re working on a tight budget and need to save money, there are some easy ways to repair your leaky taps.
First, turn off the water supply to your sink or bath. Then use a wrench to remove the nut that holds the pipes onto the spout. Next, remove the spout from the pipe (a pair of pliers will help here) and replace it with a new one. Finally, reattach the new spout with the plumber’s tape and screw it back onto the pipe.
Fixing a faulty water heater:
If you’re experiencing issues with your water heater, the first thing you should do is turn off the power. If you don’t, you could risk electrocution or damage to other electrical items in your home. Once the power has been turned off, inspect the unit and see if there are any obvious signs of damage or corrosion. If so, you can use a professional electrician to repair these problems before trying to get it running again.
Repairing basement walls:
If you have a hole in your basement wall, it’s important to get it fixed as quickly as possible. Not only will this repair stop the water from entering your basement, but it can also stop mould from growing and causing further damage. Plus, if there is basement wall spalling, then it is necessary for you to get it repaired ASAP.
Replacing a broken roof tile:
A broken roof tile is one of the easiest DIY remedial repairs around because all you need is some spare tiles and a hammer!
First of all, remove any debris from underneath the tile using your broom or vacuum cleaner (make sure it’s clean before using it). Then use your hammer and chisel to chip away at any mortar holding the tile in place. Once this is done, lift up the old tile carefully so as not to damage any surrounding ones and replace it with your new one!
Related Source: Concrete Crack Repair, Spalling Concrete
A broken roof tile is one of the easiest DIY remedial repairs around because all you need is some spare tiles and a hammer!